Thursday, June 14, 2012

Windows 7 Bootanimation

Guys i made a new boot animation with machine sound(power.ogg)
which you have seen in your windows 7 machine
This boot animation is based on win 7 start logo which starts with some stars and end with a windows colored flag....
here are some screen shot 



installation:flash with stock/cwm recovery
this bootanimation containing the machine sound
the real windows 7 sound is here you can replace it by the machine sound
first download this

please see this step by step::
i)makes sure that u have rooted and root explorer installed on your device
ii)open root explorer (mount as r/w)
iii)open system>etc.
iv)there is a file poweron.ogg.
(backup it)
replace it by the downloaded file.....
rename file by poweron.ogg

Saturday, June 9, 2012

GALAXY s3 boot anim

guys, this a new boot animation for our galaxy y og new samsung galaxy s3

off your phone
open boot in recovery(vol up+power+home)
then apply update from sdcard(2nd option)
select the file
DONE; enjoy☺

BY ME(explodeaamir@xda)

Thursday, May 31, 2012


Some secret codes of "SAMSUNG GALAXY Y".

*#*#4636#*#* phone information
*2767*3855# hard reset
*#*#7780#*#* factory reset
*#*#7594#*#* change end call/power option
*#*#197328640#*#* service mode
*#*#273283*255*663282*#*#* file copy screen (backup media files)
*#*#526#*#* wlan test
*#*#232338#*#* shows wifi mac address
*#*#1472365#*#* gps test
*#*#1575#*#* another gps test
*#*#232331#*#* bluetooth test
*#*#232337#*# shows bluetooth device address
*#*#8255#*#* gtalk service monitor

*#*#0283#*#* packet loopback
*#*#0*#*#* lcd test
*#*#0673#*#* melody test
*#*#0842#*#* device test (vibration test and backlight test)
*#*#2663#*#* touch screen version
*#*#2664#*#* touch screen test
*#*#0588#*#* proximity sensor test
*#*#3264#*#* ram version

codes to get firmware version information:
*#*#4986*2650468#*#* pda, phone, h/w, rfcalldate
*#*#1234#*#* pda and phone
*#*#1111#*#* fta sw version
*#*#2222#*#* fta hw version
*#*#44336#*#* pda, phone, csc, build time, changelist number

Saturday, May 19, 2012

V6 Supercharger Update 9 RC 8.2 + for Samsung Galaxy Young

 It is created by zeppelinrox.

  • [05-04-12| 15:50 PST] Updated Guide to V6 SuperCharger UPDATE 9 RC 8.2
  • [05-04-12| 15:50 PST] Updated Guide to KickAssKernelizerInstaller UPDATE 3 RC8
  • [05-04-12| 15:50 PST] Updated Guide Format: Detailed Guide + Quick Guide
This is a complete guide for Samsung Galaxy Young Users to make sure you get 100% Supercharger Level.
  • Detailed Guide
  • Quick Guide
1. BusyBox Installer [DOWNLOAD]
2. Script Manager [DOWNLOAD]
3. V6 SuperCharger Script [DOWNLOAD]
4. KickAss Kernalizer Script [DOWNLOAD]
DETAILED GUIDE (Preferably for first time superchargers)
V6 Supercharger Update 9 RC 8.29 Guide

1. Download and Install the required apps (BusyBox + ScriptManager) to run this script.
2. Install BusyBox and select BusyBox version v1.16.2 or higher.
Reboot your phone after installation. This is optional but recommended specially if you are upgrading from a lower version of BusyBox.
3. Install Script Manager
4. Open Script Manager and grant SuperUser Access
· Tap on Menu > Advanced Options > Config
· Scroll down until you see Browse as Root
· Tap on it and press the back button to save 
· Once again grant Script Manager SuperUser Access to save config
· Exit Script Manager
5. Open Script Manager and browse for
· Tap on it and set properties to:
1. Favorites (Star Icon)
2. Root (Green Android Skull Icon)
· After setting properties, tap on Run to execute the script installer
· When executed, it will do initial test, be patient and wait for it to complete its tasks
6. A bunch of text will start scrolling on your screen . . . and will ask you if
1. Home Locked in Memory?
· Type N for No and then press enter and another enter to continue to drivers console
7. First time SuperChargers will make a pit stop at Driver Options and set the following for Driver Options:
1. Scrolling Speed : 1 (Fast)
2. Use Build.Prop? : n (No) to use local.prop
3. Fix Emissions on Boot – just press enter to proceed
4. Run Fix Emissions on Boot? : y (Yes) to run Fix Emissions on Boot
· This will fix app permissions to avoid force closes
5. Integrate? : y (Yes)
6. Disable Cool Animations? : y (Yes) to speed up execution of script
8. Press enter to return to drivers Console. Pressing enter will automatically run Quick V6 Cust-OOMizer and will calculate optimum SuperMinFree values
1. Apply SuperMinFree Calculator Settings? : y (Yes) to apply calculated MinFree values so you don’t need to choose from 512 HP, but if you wish to select between 5-7, you need to complete supercharger initial setup and then run supercharger and then select 5-7.
· 5. UnLedded (Multitasking){8,14,40,50,60, 75 MB}
· 6. Ledded (Balanced){8,14,55,70,85,100 MB}
· 7. Super UL (Aggressive){8,14,75,90,95,125 MB}
2. Press The Enter Key... – just press on enter key to continue. This action will backup Re-SuperCharger files to SD Card .
3.SuperClean & ReStart : y (Yes) to SuperClean & ReStart. This will wipe your dalvik-cache and bootup time will take 1-2 minutes depending on the number of apps installed on your phone.
9. After restart, Open Script Manager and:
1. Go to /system/etc/init.d
2. Tap on S99SuperCharger and set the following properties:
· Favorites (Star Icon)
· Root (Green Android Skull Icon)
· Start on Boot (Gear Icon)
3. Tap on Save
4. Close Script Manager and Restart your phone
If you don’t follow step 9, you will get an error the next time you run the script and it will show you owner’s handbook on your default web browser.
10. After restart, open Script Manager and Run, If you added it to favorites, tap on Menu > Favorites and then tap on to run it and proceed in applying BulletProof Launcher:
1. SuperCharger will run Test Drive, just wait for it to finish and then continue to the Drivers Console.
2. On the Drivers Console select:
· 13 for OOM Grouping Fixes + BulletProof Launcher
3. BulletProof? : y (Yes) to apply BulletProof Launcher
4. Press Enter to go back to Drivers Console
11. Back to the Drivers Console, select:
1. 21. Nitro Lag Nullifier {Experimental}
2. Enter (N)ullify, (U)n-Nullify, E(X)it: N (Nullify) to apply Nitro Lag Nullifier
3. After applying Nitro Lag Nullifier, press enter to go back to Drivers Console.
12. Back to the Drivers Console, select:
1. 18. Engine Flush {ReCoupe RAM & Kill Lag}
2. Continue and drop all file system caches? : y (Yes) to clear system cache on RAM
4. After Engine Flush, press enter to go back to Drivers Console.
13. Back to the Drivers Console, select:
1. 30. SuperClean & ReStart {Wipe Dalvik & Reboot}
2. Do you want to SuperClean & ReStart now? : y (Yes) to commence SuperClean and Restart
14. After restart, Open Script Manager and run V6 SuperCharger again. You should see Supercharger Level: 100% 
QUICK GUIDE (for lazy guys and gals)

Driver Options
1. Scrolling Speed:
1 (fast)
2. Do you want to use Build.prop:

-N (for now)
  • This option will use Local.prop. If it doesn't exist, it will be automatically created
3. Run Fix Emissions on Boot?

  • This option will fix App FC's at boot
4. Integrate?
5. Disable Animation?
  • This will automatically run and saves you time and social energy wether to select options 5-7 from the drivers console 
1. Apply MinFree values?
2. Super Clean and Restart?
-wipes dalvik-cache

1. 13 for OOM Grouping Fixes + BulletProof Launcher
  • BulletProof?
1. 21. Nitro Lag Nullifier {Experimental}

- N
  • Apply Nitro Lag Nullifier

1. 18. Engine Flush
  • Continue and drop all file system caches?
1. 30. SuperClean & ReStart
KickAss Kernelizer Guide

1. KickAss Kernalizer Script [DOWNLOAD]
1. Assuming you already have Script Manager installed, Open Script Manager. 

2. Browse for .pdf and set properties to Favorites and Superuser then tap on Run

3. It will show a bunch of text scrolling down... 

4. When it asks for an input (KickAss/Chew Gum/KAK Stick/Exit), type K for KickAss and press enter.

5. Now the script will ask you, whether you want to enable I/O Scheduler. Select Yes to enable I/O Scheduler.

6. After that, reboot your device.

7. Open Script Manager again and navigate to system/etc/init.d folder and look for S98KickAssKernalizer script.
Set the properties to: Superuser and Run at Boot and favorites (optional) and tap on Save.
You will notice that the icon of the script changed to green android skull+gear+star, if so, you are on the right path. 

8. Reboot your device and see the increase in speed and performance.

9. Optionally you can install No-Frills CPU Control to manage CPU Governors and I/O Schedulers available on your phone including the one from KickAss Kernalizer
This works for STOCK and Custom ROMs tested on my SGY.

Thanks to Zeppelinrox for this awesome tweak